2U 12 x 3.5" Hot-Swap Barebone Storage Chassis with Phoenix Motherboard

PCICASE Model No: SB212-PH
Manufacturer Model No: SB212-PH
EOL
Key Features
  • 2U 12-Bay 3.5” HDD/SSD bay storage server
  • Supports two Intel® Xeon® Processors E5-2600 v3 Product Family
  • With Intel® C612 Series Chipset to provide 5+ years product life cycle
  • Highly dense I/O design with MAX I/O™ technology, utilizing 64 lanes of PCIe 3.0 to support up to 8 COTS PCIe add-in cards
  • Onboard Baseboard Management Controller for system management and IPMI control
  • Front-to-back airflow and hot swap redundant fans to provide optimal thermal conditions
  • Two 10 GbE SFP+ ports
Features And Benefits

SB212-PH is a 2U 12-bay server solution for general purposes, it supports dual Intel® Xeon® processors E5-2600 v3 and v4 product family and has 12 x 3.5” drive bays in the front for storage and 2 x 2.5” in the rear for OS drives. Depending on the I/O bandwidth you need for your application, you can opt for either a 12Gb/s SAS backplane with expander chip on board or one without. SB212-PH harnesses MAX I/O™ technology, maximizing the usage of off-the-shelf up to 8x PCIe expansion cards in the system.

Dimensions (W x D x H) (with chassis ears)
• mm : 482.6 x 750 x 88
• inches : 19 x 29.5 x 3.5

Material
• Heavy-duty preplated SGCC cold-rolled steel

Motherboard

AIC Server Board Phoenix

Processor
Processor Support : Two Intel® Xeon® Processors E5-2600 v3 Product Family
QPI Speeds : 9.6 GT/s, 8 GT/s, 7.2 GT/s
Socket Type : Socket R3 (FCLGA2011-3)

Chipset
Intel® C612 Chipset

System Memory
• 12 DIMM slots across 8 memory channels
(4 memory channels per CPU; 2 channels with 2DPC and 2 channels with 1DPC)
- 384GB DDR4 2133/1866 RDIMM DRx4
- 96GB DDR4 2133/1866 RDIMM SRx4
- 768GB DDR4 2133/1866 LRDIMM QRx4
- 1536GB DDR4 2133/1866 LRDIMM 3DS 8Rx4

Front Panel
• Power on/off
• System ID
• System reset

LEDs
• Power
• System ID
• Alert

Drive Bays
External : 12 x 3.5” hot swap & 2 x 2.5” hot swap

Backplane
Options :
• 3 x 4-port 6Gb SAS backplanes with single SFF-8087 connector on each
OR
• 1 x 12-port 6Gb SAS backplane with 28-PHY expander and 4 SFF-8087 connectors
Expansion Slots (PCIe 3.0)

• Config 1 : 2 x16 + 4 x8
(2 external and 2 internal)

• Config 2 : 8 x8 (6 external and 2 internal)

• Config 3 : 6 x8 (external) + 2 NVMe U.2

(Or other combinations utilizing up to 64
lanes and fewer than 8 slots)

Riser Card (included)

• PSG-RC-TO2U-80-110 (PSG Code: PE2U20) :
1U PCIe Gold-finger to 4 x PCIe x8

System BIOS
BIOS Type :
• Insyde UEFI BIOS
• SPI (Serial Peripheral Interface) FLASH Interface
BIOS Features :
• ACPI
• PXE
• WOL
• AC loss recovery
• IPMI 2.0 KCS interface
• SMBIOS
• Serial console redirection
• BIOS Boot Specification
• BIOS Recovery Mode
• SRIOV
• PCIe Hotplug
• iSCSI
• TPM
• PCIe NTB

On-board Devices
SATA :
Built-in SATA controller on Intel® C612 Chipset with software RAID support
IPMI :
Aspeed AST2400 Advanced PCIe Graphics & Remote Management Processor
• Baseboard Management Controller
• Intelligent Platform Interface 2.0 (IPMI 2.0)
• iKVM, Media Redirection, IPMI over LAN, Serial over LAN
• SMASH Support
Network Controller :
• Intel® 82599ES 10 GbE Controller, dual port, SFP+, PCIe v2.0 (5.0GT/s optional)
• Intel® Ethernet Controller I210-AT, single port GbE controller, PCIe v2.1, 2.5 GT/s, x1
• Intel® Ethernet Network Connection I217-LM, single port GbE, 1 Gbps
Graphics :
Aspeed AST2400 Advanced PCIe Graphics & Remote Management Processor
• PCIe VGA/2D Controller
• 1920x1200@60Hz 32bpp

Rear I/O
• 2 x 10 GbE SFP+
• 2 x RJ45
• 2 x USB 3.0
• 1 x VGA
• 1 x Serial

Power Supply
AC 750W 1+1 redundant high-efficiency power supply 80+
• 90-264VAC, 47-63 Hz

System Cooling
4 x 80x38mm easy swap fans

System Management
• IPMI 2.0
• KVM over IP
• Media redirection
• Temperature, fan, voltage, PSU sensor monitor
• System temperature
• System ID / System fail indicator
• Remote power on/off/reset
• SEL message alarm through mail
• SNMP support
• Intel NM

Environmental Specifications
• Operating temperature : 0° - 35°C
• Operating altitude condition : 0 ~ 10K feet
• Storage temperature : -20° ~ 60°C
• System relative humidity : 5% - 95% (38°C) non-condensing

Gross Weight (w/PSU & Rail)
• kgs : 31.5
• lbs : 69.3

Packaging Dimensions (W x D x H)
• mm : 591 x 973 x 318
• inches : 23.3 x 38.3 x 12.5

Mounting
Standard : 28" tool-less slide rail
* All specifications are subject to change without notice.

Datasheet SB212-PH Datasheet
 

 SB212-PH Datasheet.pdf

 

User Manual  SB212-PH User Manual
 

 Phoenix User Manual.pdf

 

Product Images  SB212-PH (Front 45 Degrees)
 

 SB212-PH_Front45_800_x_800.jpg

 

Product Images                                          SB212-PH (Front)
 

 SB212-PH_Front45_800_x_800.jpg

 

Product Images      SB212-PH (Top)
 

 SB212-PH_TopOpen_800_x_800.jpg

 

Product Images  SB212-PH (Rear)
 

 SB212-PH_Rear_800_x_800.jpg

 

Get in touch

Give us a call to find out more about our products

Inside the UK
0870 300 3388

Outside the UK
+44 1908 272770

Or send us an email
pcisales@pcicase.co.uk