SEAGATE Enterprise 3.5" SATA 10TB HDD

Formatted (512 bytes/sector): 10TB

Heads: 14

Discs: 7

Bytes per logical sector: 512

Bytes per physical sector: 4096

Recording density, KBPI (kb/in max): 2230

Track density, KTPI (ktracks/in avg.): 386

Areal density, (Gb/in²): 867

Spindle Speed (RPM): 7200

Internal data transfer rate (Mb/s max): 2695

Sustained ata transfer rate OD (MiB/s max): 237 (249 MB/s max)

I/O data-transfer rate (MB/s max): 600

ATA data-transfer modes supports:
PIO modes 0-4
Multiword DMA modes 0-2
Ultra DMA modes 0-6

Cache buffer: 256MB (262,144KB)

Weight (maximum): 650g (1.43lb)

Average Latency: 4.16ms

Power-on to ready (sec)(typ/max): 20/30

Standby to ready (sec)(typ/max): 20/30

Startup current (typical) 12V (peak): 2.0A (optional configuration through Smart Command Transport)

Voltage tolerance (including noise):
5v +10/-5%
12V +/- 10%

Ambient temperature:
5° to 60°C (operating/tested)
–40° to 70°C (nonoperating)

Temperature gradient (°C per hour max): 
20°C (operating)
30°C (nonoperating)

Relative humidity:
5% to 95% (operating)
5% to 95% (nonoperating)

Relative humidity gradient: 30% per hour max

Altitude, operating: 
–304.8 m to 3,048 m
(–1000 ft to 10,000+ ft)

Altitude, nonoperating (below mean sea level, max): 
–304.8 m to 12,192 m
(–1000 ft to 40,000+ ft)

Operational Shock (max at 2 ms): Read 70 Gs / Write 40 Gs

Non-Operational Shock (max at 2 ms): 250 Gs

Vibration, operating:
5–22 Hz: 0.25 Gs, Limited displacement
22–350 Hz: 0.50 Gs
350–500 Hz: 0.25 Gs

Operation Rotational vibration: 20–1500Hz: 12.5 rads/s²

Vibration, nonoperating: 2–500 Hz: 2.27 Grms ref

Drive acoustics, sound power (bels):
Idle**
2.8 (typical)
3.0 (max)
Performance seek
3.2 (typical)
3.4 (max)

Nonrecoverable read errors: 1 sector per 1015 bits read

Annualized Failure Rate (AFR): 0.35% based on 8760 POH

Maximum Rated Workload:
Maximum rate of <550TB/year
Workloads exceeding the annualized rate may degrade the drive MTBF and impact
product reliability. The Annualized Workload Rate is in units of TB per year, or TB per
8760 power on hours.
Workload Rate = TB transferred * (8760 / recorded power on hours).

Warranty:
To determine the warranty for a specific drive, use a web browser to access the following
web page: http://www.seagate.com/support/warranty-and-replacements/.
From this page, click on the “Is my Drive under Warranty” link. The following are
required to be provided: the drive serial number, model number (or part number)
and country of purchase.The system will display the warranty information for the
drive.

Load-unload cycles: 600,000

Supports Hotplug operation per Serial ATA Revision 3.2 specification: Yes